Use
INDICATOR DG8000 RevB0
78
DATA TRANSFER BY MODEM
1 First, to manage the synchronization
and to transfer data between the
indicator and the DTM software on
your PC, the connection between the
GPRS and the indicator must be
enable.
From the configuration system, press
the
key to enter the setups
protected by a password. Enter the
password “1290” by using the quick
incrementing keys and press
ENTER.
By using the ↑ and ↓ keys, select
YES to activate the function. After
pressing ENTER, you need to turn
OFF/ ON the indicator.
It is also necessary, if not done, to
connect the indicator with the
software by inserting the company
code using the password “1203”.
2 Two new functions will appear on the
TOTAL WEIGHT mode. On the first
page, you can find the
key,
and on the second page the
key.
In the TOTAL WEIGHT mode, the
WiFi synch. key
is not enable
anymore.
For these two functions to be manageable, it
is necessary to set the number 89 of the
basic parameters (Data Transfer enabled) at
“YES”. This will occur the impossibility to
manage the programming function
.
