Use
INDICATOR DG8000 RevB0
72
Restart function
1
If you press the
key you can recall the programmed value of a Component.
This function is used in case of mistakes by the operator or in case the program is not
suspended during the movements and a variation in the weight of the Component to be
loaded occurs. You must keep it pressed for 2 seconds (as indicated on screen).
Storage of the execution function
1
If you press the
key you can
store the execution up to that moment
and resume it later. This function can
be used, for example, in case you
must make manual weighings during
the execution of a Recipe, in case you
must change some parameters during
the execution of the Recipe, etc.
2
The state of the execution will be
stored in memory and when the
operator resumes the execution of a
Recipe the system will show the
following message and you must
choose if you want to complete the
stored Recipe or start a new
execution.
End of the execution
At the end of the execution, the system shows the programmed total to be unloaded, the
total actually unloaded, the error in Kgs and in percentage obtained.
