Use
INDICATOR DG8000 RevB0
80
Synchronization after having sent
data from the software
Synchronization after having saved data in
the internal memory of the indicator
When receiving data, the internal memory of the indicator overwrites the data with the
new one. When sending data, the indicator clear its internal memory.
SCHEDULER MANAGEMENT
DG8000, by means of the Scheduler, can start working processes in automatic on the
basis of times associated to the relative programs. This way of work is commonly used
on stationary applications for full automation of the feed preparation processes (for
example, stationary mixer using the Motor Control Box).
The programming of the Scheduler, in other words the process start times related to
each singular programs, can be made on the PC by means of the DTM and transferred
afterwards to the indicator by means of the memory card.
The scheduled time, or the
mode of connection, can also be programmed directly on the indicator.
You need to have DTM i software installed on the PC if you want to set the reference
date and time for programs by the scheduler (please refer to the software help online
for the instructions).
TO ENABLE THE SCHEDULER ON THE INDICATOR
Enable the password 166 in order to manage the scheduling.
