Use
INDICATOR DG8000 RevB0
66
The screens, during the whole phase of the execution, will provide several pieces of useful
information as shown below.
The left column shows the loading state of each component, the right column shows the
loading state of the whole recipe.
At the bottom you can find the number and the name of the component and the value of
the total loaded up to that moment. At the end of the program load, a screen will appear
showing at the top you some information about the number of prints to be made and the
end of the execution and the mixing time that will automatically start once the loading has
been made and the name of the program.
1
By pressing the
or
it is possible to load the components without
considering the order of programming in the recipe.
A "Save quantity?" window will appear, then press ENTER again. It is possible disable
this function by setting the value of base parameter 15 “Manual Comp.Selection” equal
to “Unload” or “None”.
2
Some of the components (like premix) should be added to the batch in a very small
quantity that is often not correctly recognized by the weighing system due to external
impact (vibrations of the mixer wagon, etc.). To minimize this kind of error we have
introduced handheld components. These components are weighed on the external
accurate scale and then added to the mixer. During their loading the weight readings of
the mixer will not change. After the component loading microcomputer operator has to
press ENTER key twice to confirm the operation and advance to the next component.
The handheld components will have
the line “HH-” added before its name.
