Use
INDICATOR DG8000 RevB0
E
N
GL
IS
H
71
The screens, during the whole phase of the execution, will provide several pieces of useful
information as shown below.
At the top you can find the name of unloading program.
The left column shows the state of unloading on the feeding of the relative group, the right
column shows the unloading state of the whole program.
At the bottom you can find the number and the name of the group, the value of the total
unloaded up to that moment.
Choice of the group
1
By pressing the
keys you can select which group to discharge.
You may also disable this function by setting the value of base parameter 15 “Manual
Comp.Selection” equal to “Unload” or “None”
2
If you do not want to discharge a pen, press ENTER. The "Save Quantity?" dialog box
appears and then press ENTER again.
Block function
1
If you press the
key you can
suspend the program during the
movements of the wagon so that the
soil conditions and mechanical
tensions do not alter the weight, on
the display you will see the “program
suspended” message.
2
Press the same key to re-start the program and resume working, the system will show
the weight that was on the display before suspension.
