Digital Equipment LG31 Installation & Operator'S Manual Download

Page: 114 / 142

Figure 6–6:

Ribbon Cartridge Installation, Ribbon Guide and Striker
Bar

RE_UK00970A_89

STRIKER BAR

RIBBON
GUIDE

RIBBON

CARTRIDGE

6.5 Paper Motion

For many paper motion operations, there are four ways to perform the
operation:

In off-line mode, when printer control strap A26 is OUT, directly from
the associated keys on the control panel.

In off-line mode, when printer control strap A26 is IN, directly from
the associated keys on the control panel.

In program mode, from the configuration menu (see Chapter 4).

In function mode (see Chapter 4).

The off-line method is given in the following sections.

6.5.1 Form Feed

To perform a form feed operation, place the printer off-line ([ O F L] is
displayed). Press the FORM FEED key.

See Chapter 4, Section 4.4.3 and 4.4.6 for alternate methods.

6–8

PRINTER OPERATION

Summary of Contents for LG31















































































































































Search results

Summary of Contents for LG31

Reviews:

Related manuals for LG31

Brands by name

Popular brands

Digital Equipment LG31, Installation & Operator'S Manual

Search results

Summary of Contents for LG31

Reviews:

Related manuals for LG31

Brands by name

Popular brands