Figure 4–16:
Forms Control
Form Control:
0.
Exit
1.
Form Feed
2.
Line Feed (forward)
3.
Line Feed (reverse)
4.
Set Top of Form
5.
Set Top Margin
6.
Set Bottom Margin
7.
Set Bottom of Form
8.
1/72 inch Paper Forward
9.
1/72 inch Paper Reverse
Forms Control (lines):
Form Length
- 66
Top Margin
- 01
Bottom Margin - 66
Press the number ‘0’ to return to normal operation.
To continue modification select (1-8).
To select the forms control category in the program mode:
1.
Place the printer off-line ([ O F L] is displayed). If the printer is
on-line ([ O n L] is displayed), press the ON LINE key.
2.
Press the PRG key ([ P r o] is displayed). The LG31 printer will print
the configuration menu.
3.
Press the (3) key. The LG31 printer will list the forms control options
(see Figure 4-14).
4.
Press and hold the (2) key until the top of the sheet aligns with the
notches in the upper tractors.
5.
Press the (4) key to start the line count. The display is [ 0 0 0].
6.
Press and hold the (2) key until you reach the desired top margin.
The display reads the number of lines the paper moves forward (9
lines equals 1½ inches).
7.
Press the (5) key to set the top margin.
8.
Press and hold the (2) key until you reach the desired bottom margin.
The display reads the number of lines the paper moves forward (51
lines equals 8½ inches). The display reads [ 6 0] 9+51.
9.
Press the (6) key to set the bottom margin.
SETTING COMMUNICATIONS AND PRINT PARAMETERS
4–23
