1.
Turn the printer power on. Open the top cover and pull the interlock
switch plunger up to its highest point.
This activates the inner
control panel.
2.
When the self-test completes and the display reads [ O F L], press
the (1) PRG key. The LG31 printer will print the configuration menu
(see Figure 4-2).
3.
To select a category of parameters, push the key with the category
number shown on the configuration menu. To see the form control
parameters, press (2). The LG31 will print a list of the form control
parameters.
4.
To select a parameter, press the key number shown next to the
parameter.
5.
To exit from the category back to the program mode, press the (0)
key.
6.
Press the (0) key to return to the configuration menu.
7.
To return the printer to the off-line mode, press the (0) TEST CLR
key.
4–6
SETTING COMMUNICATIONS AND PRINT PARAMETERS
