Figure 4–20:
Printer Control Straps — Factory Setting
Printer Control Straps:
0.
Exit
1.
Printer Straps A
2.
Printer Straps B
Straps:
0. Exit
1.
Strap ‘IN’
2.
Strap ‘OUT’
3.
Forward Without Change
4.
Reverse Without Change
Printer Control Straps:
Printer Straps A:
0
1
2
3
12345678901234567890123456789012
00000000000000000000100001110010
Printer Straps B:
0
1
2
3
12345678901234567890123456789012
00000000000000000000000000000000
Press the number ‘0’ to return to normal operation.
To continue modification select (1-8).
End of Program Mode
3.
Press key (8). The printer will list the options available (see Fig-
ure 4–20). The interface straps and their present condition are listed
in the configuration menu.
4.
Press the (3) key until the number of the desired strap shows in the
display.
5.
Press (1) to enable the strap (an "i" on the display).
6.
Press (2) to disable the strap (an "o" on the display).
7.
Press the (0) key and the printer will return to the printer control
category.
8.
Press the (0) key to return to the configuration menu.
9.
Press the (0) key and the LG31 printer will return to off-line opera-
tion ([ O F L] is displayed).
SETTING COMMUNICATIONS AND PRINT PARAMETERS
4–27
