Figure 4–19:
Vertical Tab Stops
9keep)
Vertical Tab Stops:
Cannot set vertical tabs from the menu
0.
Exit
Vertical Tab Stops:
Press the number ‘0’ to return to normal operation.
To continue modification select (1-8).
4.4.6 Vertical Tab Stops
The vertical tab stops cannot be set from the configuration menu. The
response of the LG31 printer to a vertical tab stops entry is shown in
Figure 4–19.
4.4.7 Printer Control Straps
There are 64 printer control straps in the LG31 printer. These straps
control how the LG31 responds when printing data.
For a detailed
description of these straps, see Chapter 2, Section 2.2 in the LG31 User’s
Guide (EK-LG31E-UG).
1.
Printer Control Straps (A) — There are 32 A software straps that
you can define as in or out. When you enter the interface strap A
sub-category, the strap number is displayed in the left two digits (1-
32) of the display panel. The right digit indicates whether the strap
is in (i) or out (o).
2.
Printer Control Straps (B) — There are 32 B software straps that
you can define as in or out. When you enter the interface strap B
sub-category, the strap number is displayed in the left two digits (33-
64) of the display. The right digit indicates whether the strap is in
(i) or out (o).
To select the printer control category of parameters (see Figure 4–20).
1.
Place the printer off-line ([ O F L] is displayed). If the printer is
on-line ([ O n L] is displayed), press the ON LINE key.
2.
Press the PRG key ([ P r o] is displayed). The LG31 printer will print
the configuration menu.
4–26
SETTING COMMUNICATIONS AND PRINT PARAMETERS
