5–12
Connecting to a Network
Connect a Transceiver Cable to Your System
A transceiver cable is the physical connection between a standard
Ethernet network interface and an InfoServer 100 system. You use a
transceiver cable to connect your system to an H4000 transceiver or
DELNI unit, which is attached to the standard Ethernet cable. To connect
a transceiver cable to your system:
1. Set the
l O
on/off switch on the rear of the system unit to off (O).
2. Connect the 15-pin connector on the transceiver cable to the standard
Ethernet connector on the rear of the system unit.
3. Use a screwdriver to move the connector’s sliding lock and make the
standard Ethernet connection secure.
Sliding Lock
MLO-002761
M A - 0 3 6 6 - 9 0 . D G
