InfoServer 100 System
1–3
•
RZ23 hard disk drive
The system includes one 104 Mbyte hard disk drive. This drive:
— Stores configuration information from the server.
— Works as a secondary disk cache, to optimize the performance of
all disks connected to the server.
— May also be served to client nodes as writable storage.
•
Self-sensing power supply
The system power supply accepts power inputs in the ranges of 100
Vac to 120 Vac and 200 Vac to 240 Vac, at 50 or 60 Hertz. A selection
switch is not needed.
•
Communication ports
A single DEC-423 asynchronous port (with MMJ connector for
VT series terminals) is provided as standard. You can use this
port to connect a terminal to the server to establish a local server
management session. (See the
InfoServer 100 System Operations
Guide
for more information). This port is preset to run at 9600 baud,
so any terminal connected to this port must be set at 9600 baud.
•
SCSI connectability
The small computer systems interconnect (SCSI) is an industry
standard for connecting mass storage devices.
•
Add-on storage devices
You can purchase external expansion boxes to provide added storage
capability. These external boxes must be qualified by Digital in order
to meet the system requirements. You can connect up to six external
drives to the server.
