2–16
Installing Your System
Unloading a Compact Disc
Before unloading a compact disc, make sure the green activity light
is not flashing. If the light is flashing, then the compact disc drive is
transferring data. Wait until the green activity light stops flashing.
1. Align the transparent sleeve with the drive opening, as when loading
a disc. Make sure the arrow on the sleeve is going into the drive
opening first.
2. Insert the sleeve into the drive opening as far as it will go.
3. Remove the caddy. The disc and housing will be in the sleeve. The
green activity light turns off.
Connecting to a Network
After you verify that the InfoServer 100 passes its power-up self-test
sequence, you must connect it to the network to make it available to
client systems. To connect to a network:
1. Turn the system unit’s
l O
power switch off (O).
2. Read Chapter 5 to learn how to install your network hardware.
3. After making the network connection, turn the system unit’s
l O
switch back on. The server should pass the power-up self-test and
rebootstrap itself.
4. Refer to the
InfoServer 100 System Operations Guide
for information
on how to establish a server management session to set up and control
the server.
How to Turn Off Your System
Turn off your equipment in the following order, by setting the
l O
switches to O (off):
1. Console terminal
2. Expansion boxes
3. System unit
