Expanding Your System
4–3
Preparing Your System for an Expansion Box
If you plan to add an expansion box to your system, you must first remove
the SCSI cover and the terminator connected to the SCSI port.
1. To remove the SCSI cover, place your fingers under the locking tab
and lift the cover to release.
MLO-002766
SCSI Cover
Lift Locking Tab
to Release
M A - 0 3 7 7 - 9 0 . D G
2. Remove the SCSI terminator.
MLO-002767
SCSI Terminator
M A - 0 3 7 8 - 9 0 . D G
Save the terminator and cover — you must reattach them if you
disconnect all expansion boxes from the system unit.
