5–8
Connecting to a Network
To connect your system, attach one end of the ThinWire cable to the office
side of the DECconnect faceplate. Attach the other end of the ThinWire
cable to the ThinWire connector on the back of your system unit.
T-Connector
MLO-002760
M A - 0 3 6 4 - 9 0 . D G
Troubleshooting the ThinWire Segment
If you find problems during the ThinWire Ethernet installation, use the
following checklist to make sure all connections are correct:
1. Check that all connections are secure on the ThinWire Ethernet
segment.
2. Check that there is a T-connector between the connector on the
ThinWire cable and the system unit.
3. Check that there is no ThinWire segment between the system and the
T-connector. The T-connector must attach directly to the system.
