Connecting to a Network
5–3
Connecting to a ThinWire Ethernet Network
This section describes how to connect the InfoServer 100 system to a
ThinWire Ethernet system. First, you must check the position of the
network select button.
Check the Network Select Button
The InfoServer 100 has a network select button on the rear of the system
unit. When you first receive the system, the button is usually set to the
in position.
• In — ThinWire Ethernet
• Out — Standard Ethernet
To use ThinWire Ethernet on your system, make sure the button is
pressed in. If the button is set correctly, the green light to the left of the
ThinWire Ethernet connector will come on when you turn on the system.
The standard Ethernet light remains off. You are ready to connect to
ThinWire Ethernet.
Standard Ethernet Light
Network Select Button
ThinWire Light
MLO-002753
M A - 0 3 6 1 - 9 0 . D G
