6
Index
Solving problems (Cont.)
See
Troubleshooting, 6–1
Standard Ethernet
attaching loopback connector to,
2–7
feature, 1–2
transceiver cable, 5–12
troubleshooting, 5–13
Standard Ethernet cable
optimum uses, 5–2
Standard Ethernet connector, 2–4
Standard Ethernet light, 2–4
Standard Ethernet networks
connecting to, 5–10 to 5–13
setting network select button for,
5–11
verifying, 5–11
Starting up, 2–12
Storage conditions
system unit, B–2
Storage devices, 3–1, 3–2
Summary
of SET commands, 6–14
of SHOW commands, 6–14
of TEST commands, 6–14
Surge protector, 2–2
System
configuration display, 6–8
connecting console terminal to,
2–10
connecting power cord to, 2–9
connecting to networks, 2–16
System ac power inlet, 2–4
System configuration
displaying with TEST 50
command, 4–11
System exerciser, 6–11
display example, 6–11
restarting after running, 6–13
testing media, 6–11
when to use, 6–11
System SCSI IDs, A–2
System specifications
operating conditions, B–2
System unit
System unit (Cont.)
attaching Ethernet connectors to,
2–7
choosing a location, 2–1
connecting transceiver cable,
5–12
diagnostic lights, 6–16
dimensions, B–1
hardware specifications, B–1
ports and connectors, 2–4
storage conditions, B–2
troubleshooting, 6–2
turning off, 2–16
turning on, 2–12
unpacking, 2–2
T
Tape cartridges
faulty, 6–12
T-connector
attaching terminators to, 2–7
attaching to system unit, 2–7
connecting ThinWire Ethernet
cable to, 5–5
connecting to system unit, 5–6
diagnostics, 2–7
removing from system unit, 5–9
troubleshooting, 5–8
Temperature requirements, 2–1
Terminal
baud rate, 2–10
connecting, 2–10
optional console, 3–2
settings, 2–10
troubleshooting, 6–2
turning on, 2–12
Terminators
attaching to T-connector, 2–7
expansion box, 4–4
SCSI, A–3
ThinWire Ethernet, 5–5
troubleshooting, 5–9
TEST 0 command, 6–11
