Denso BHT-904B, User Manual

Page: 63 / 198

49
Barcode Handy Terminal
4.5 SYSTEM MENU
4.5.1 Executing Setup (“SETUP” menu)
The BHT setup can be effectively executed using the BHT Setting and clone functions.
This section explains the setup with the clone function using the two BHTs. Use the following procedure to
setup the BHT.
1.
Select “0: SETUP” at the SYSTEM MENU and then press the
ENT
key.
The screen on the right appears.
“1: CLONE”:
Creates a BHT clone (duplicate) using the two BHTs.
The clone function is similar to the conventional HT-HT Copy
function. Differences between them are explained below.
Function Clone HT-HT Copy
OS Copy Available Not Available
Overwrite copy
(The file in the receiving device is overwritten
by the file in the transmitting device.)
Available Available
File Copy
Clone
(Files in both receiving and transmitting
devices are identical.) [Default]
Available Not Available
General system setting values
(excluding the items below)
Available Available
OS Setting Values
Copy
• IP characteristic value (only when “0.0.0.0”)
• Subnet mask
• Default gateway
• BHT-Ir protocol communication ID
• Clone authentication key
Available Not Available
Progress Display
Displayed for Each
Item
File Forwarding
Progression Only
Display
History (usage history) Available Not Available
Target clone selection (OS) Available Not Available
Post-function execution operations
(reboot designation, etc.) Designations
Available
No Designations
Available
Copy mode (overwrite/clone) Available Not Available
Setting Values
Clone authentication key (*1) Available Not Available
Operational
Environment
Communication settings
Fixed
(IrDA: 460800)
Optional
(*1): The setting of the clone authentication key allows the clone function to be passworded.
Press the Backspace/clear key to return to the SYSTEM MENU.