Denso BHT-904B User Manual Download Page 133

Page: 133 / 198

119

Barcode Handy Terminal

4.5.8

BHT system information.

6: VERSION” at the SYSTEM MENU and then press the

he SYSTEM INFORMATION screen displays as shown on the right.

YSTEM

Ver.]:

System

program

version

OM SIZE]: ROM

size

YSTEM MESSAGE]:

System message version

ONT]: Loaded

font

type

and

version

ress the Backspace/clear key to return to the SYSTEM MENU.



icense List

ress the

key at the SYSTEM INFORMATION screen to display a

cense list as shown on the right.

The license list displays the names of functions for which licenses are
required.

[1] ”



” symbol: Indicates that a license has been registered.

[2] ”



” symbol: Indicates that no license has been registered.

* Even if functions for which licenses are required are loaded in the system, these functions do not

display in the list if they have never been run.

Press the

key or press the

Backspace/clear key to return to the SYSTEM INFORMATION screen.

System Information (SYSTEM INFORMATION Menu)

[1] Displaying the BHT system information

Use the following procedure to display the

Select “

ENT

key.

T

[S
[R
[S
[F

P

P
li

Summary of Contents for BHT-904B







































































































































































































Search results

Summary of Contents for BHT-904B

Reviews:

Brands by name

Popular brands

Denso BHT-904B, User Manual

Search results

Summary of Contents for BHT-904B

Reviews:

Brands by name

Popular brands