Denso BHT-904B, User Manual

Page: 149 / 198

135
Barcode Handy Terminal
4
ARAMETER Menu)
t
he same settings can be set at another BHT by copying the system pa
t computer and so on.
le at another BHT.
etw
menus.
T Unit
.5.13 Downloading/Uploading the BHT System P
(SYSTEM P
arameter File
settings such as values, LCD
Settings”.
rameter file to that BHT.
The system parameter file (file name: “_BHT.SYS”) is a file containing
contrast and beeper volume set at section “4.5.6 System Environmen
T
Copying the System Parameter File
(1) Upload the system parameter file to the hos
(2) Download the uploaded system parameter fi

Supplement

The system parameter file can also be copied directly b
their respective UPLOAD and DOWNLOAD
een two BHT units by opening
s” for details of the copy method. Refer to section “4.5.5 Copying Files between 2 BH

ploading the System Parameter File
reate a system parameter file based on the current setting values and upload it to the host computer and
o on. After uploading, delete the created system parameter file.

ownloading the System Parameter File
eceive the system parameter file from the host computer and so on to which it was backed up, and after
etting the stored values, delete the received system parameter file.
The communication parameters, communication protocol, and interface set at “[5] Setting the
communication environment” in section “4.5.6 System Environment Settings” are used when uploading
and downloading.
Use the following procedure to download and upload the system parameter file.
1.
Press the [3] key while holding down the
SF
key at the SYSTEM
MENU.
The SYSTEM PARAMETER menu screen displays as shown on the
right.
[1: DOWNLOAD]:
Downloads the BHT system parameter file to the BHT user area.
[2: UPLOAD]:
Uploads the BHT system parameter file stored in the BHT.
Refer to the following section for details of the above items.
Press the Backspace/clear key to return to the SYSTEM MENU.
U
C
s
D
R
s