Denso BHT-904B, User Manual

Page: 106 / 198

92
BHT-904B/BHT-914B
“2: IP ADDRESS”: Setting the IP address
cursor keys ([ ▲ ] [ ▼ ]) or numeric keys ([1] [2] [3]) to highlight
(2) The mode changes to entry mode and the cursor displays, allowing the
To delete
the Backspace/clear key or press the
SF
and Backspace/clear keys si
ey.
are all set to [0.0.0.0], DHCP is enabled.
ress the Backspace/clear key to return to the SET TCP/IP menu.
etting the timeout (only when COM1 selected)
elect “3: TIMEOUT” at the SET TCP/IP menu to display the screen on
e right where the current settings are displayed.
To change the setting:
item to be set and press the
ENT
key.
wing the
To delete a single character, press the Backspace/clear key. To delete
ey.
ress the Backspace/clear key to return to the SET TCP/IP menu.
Select “2: IP ADDRESS” at the SET TCP/IP menu to display the screen
on the right where the current settings are displayed.
To change the setting:
(1) Use the
the item to be set and press the
ENT
key.
setting to be entered with the numeric keys and dot key.
To delete a single character, press the Backspace/clear key.
the entire entry, press and hold
multaneously.
(3) Enter the desired value and then press the
ENT
k
If the IP address, subnet mask and default gateway
P
S
S
th
(1) Use the cursor keys ([ ▲ ] [ ▼ ]) or numeric keys ([1] [2] [3] [4] [5]) to
highlight the
(2) The mode changes to entry mode and the cursor displays, allo
setting to be entered with the numeric keys and dot key.
the entire entry, press and hold
ltaneously. the Backspace/clear key or press the
SF
and Backspace/clear keys simu
(3) Enter the desired value, and then press the
ENT
k
P