Denso BHT-904B, User Manual

Page: 27 / 198

13
Barcode Handy Terminal
2.2 Loading the Battery
Batteries are not included in the package. Have the battery specified by DENSO WAVE ready.
Specified battery: AA alkaline battery (LR6) or AA rechargeable battery eneloop
®
(HR-3UTGA)
Note 1: Use rechargeable batteries already charged.
Note 2: eneloop
®
is a registered trademark of SANYO Electric Co., Ltd.
Note 3: If rechargeable batteries other than eneloop
®
are used, the BHT unit may not operate properly.
1.
Slide the battery cover lock (1) in the direction
indicated by the arrow and remove the battery
cover (2).
2.
Make sure to use the battery selector switch to
select the desired battery type.
LR6/Ni-MH,AA
Alkaline Ni-MH
LR6/Ni-MH,AA
Using alkaline batteries

Point

To ensure correct operation of the
battery power level indicator and the
charging function, make sure to select
the desired battery type with the
battery selector switch.
Using rechargeable batteries
LR6/Ni-MH,AA
LR6/Ni-MH,AA
Alkaline Ni-MH
3.
Make sure that the new batteries are in the
correct orientation when inserting them. Insert
the new batteries in the direction indicated by
the arrow.

Point

Do not use batteries other than those
specified by DENSO WAVE.
4.
Insert the battery cover tab (1), and then close
the battery cover (2). The battery cover is now
locked in position.