Denso BHT-904B User Manual Download Page 3

Page: 3 / 198

Barcode Handy Terminal

Customer Registration and Inquiries

Customer Registration

To allow us to provide our customers with comprehensive service and support, we request that all customers

complete a Member Registration Form. Registered members will be offered the following privileges.



The latest upgrade information



Free exhibition and event information for new products



Free Web-information service “QBdirect”.

QBdirect Service Contents

Information search service (FAQ)

Offers detailed information on each product.

Download service

Offers downloads of repair modules for the latest BHT Series

systems or software, and sample programs.

E-mail inquiries

Product related queries can be sent in by e-mail.

* Please note that these privileges may be subject to change without prior notice.



How to Register

Access the URL below and follow the instructions provided.

http://www.qbdirect.net/

Inquiries



Technical Inquiries (QBdirect)



BHT product programming method



Product setup method, usage



Summary of Contents for BHT-904B







































































































































































































Search results

Summary of Contents for BHT-904B

Reviews:

Brands by name

Popular brands

Denso BHT-904B, User Manual

Search results

Summary of Contents for BHT-904B

Reviews:

Brands by name

Popular brands