Denso BHT-904B, User Manual

Page: 10 / 198

ix
BHT-904B/BHT-914B
Handling the BHT
Mishandling of the BHT-904B/BHT-914B may result in electrical shock, overheating, or smoke generation.
Please read the following items prior to use.

Never disassemble or modify the BHT.
 Do not insert foreign materials in the BHT.

Never place the BHT into or soak it in water or seawater.

Never put the BHT into a microwave oven or high-pressure container.

Never put the BHT in places where there are excessively high temperatures, such as inside closed-up
automobiles or in places exposed to direct sunlight.

Avoid using the BHT in extremely humid or dusty areas or where there are drastic temperature changes.

Do not use the BHT with the damaged case.

Do not use the power supply other than the battery specified by DENSO WAVE.

When loading the battery in the BHT unit, set the battery selector switch on the BHT unit correctly in
accordance with the type of the battery.

If the LCD is damaged and the liquid crystal leaks, do not drink, inhale, or apply the liquid crystal on the
skin.

Never stare into the laser light. Failure to do so will result in eye injuries.

Never point the code reading window at someone’s eyes.

If smoke, abnormal odors, or noises come out from the BHT, immediately turn OFF the power and pull
out the batteries.
 If the LCD is damaged and the liquid crystal gets into the eyes or mouth, wash thoroughly with clean
water such as tap water, and obtain medical treatment immediately.
Also, if leaked liquid crystal gets on the skin or clothes, wipe it off immediately and wash with soap and
water. It can cause loss of sight and skin problems.

If the LCD is damaged, be careful of broken glass. Failure to do so could result in injury.