Denso BHT-904B, User Manual

Page: 56 / 198

42
BHT-904B/BHT-914B

(Example 3) Recommended download method
After system initialization, first download the program to be executed simply by pressing the Power key
(
). In this case, this program is always registered at the beginning of the system directory
management unless the program has been deleted and another file downloaded.
Directory info
:
:
:
(1) MAIN.PD4
(2) SUBMAIN.PD4
(3) AAAAAAAA.DAT
(4) BBBBBBBB.DAT
SUBMAIN.PD4
MAIN.PD4
Directory info
:
:
:
BBBBBBBB.DAT
AAAAAAAA.DAT
Download in
the order (1),
(2), (3), (4).
<Status following system initialization>
4.3.4 Executing by Wake-up
By specifying the wake-up time at the user program, the BHT can be started up at the wake-up time and a
program executed.
If an auto-start execution program has been selected at the System Mode “4.5.6 [1] Setting the auto-start
execution program”, the selected program will be executed.
If no auto-start execution program has been selected, the first registered program from among the
programs (.PD4) registered in the BHT will be executed.
Refer to the “BHT-BASIC Programmer’s Manual” for details.
4.3.5 Executing by Remote Wake-up
If remote wake-up is enabled, the BHT can be started up by receiving a control command from the host
computer. If a fixed file called “BHTRMT.PD4” exists in the BHT at this time, BHTRMT.PD4 will be
executed.
In other words, it is possible to execute the desired program by chaining from BHTRMT.PD4 using a
BHT-BASIC CHAIN statement.
Refer to “4.5.13 Setting the Remote Wake-up (SET REMOTE WAKEUP Menu)” and the “BHT-BASIC
Programmer’s Manual” for details.
4.3.6 Executing the Auto-start Execution Program from the Point of
Start-up
When the Enter key is pressed to turn ON the power, the auto-start execution program can run from the
point of start-up. It is useful, for instance, to restart the operation program from the point of start-up if
communication (e.g., wireless communication) does not occur as expected.