Denso BHT-904B, User Manual

Page: 172 / 198

158
BHT-904B/BHT-914B
6.1 Replacing the Battery
Batteries are not included in the package. Have the battery specified by DENSO WAVE ready.
Specified battery: AA alkaline battery (LR6) or AA rechargeable battery eneloop
®
(HR-3UTGA)
Note 1: Use rechargeable batteries already charged.
Note 2: eneloop
®
is a registered trademark of SANYO Electric Co., Ltd.
Note 3: If rechargeable batteries other than eneloop
®
are used, the BHT unit may not operate properly.
6.1.1 Replacing the Battery
1.
Press the power key ( ) to turn OFF the BHT power.
The screen displays as shown on the right.

Point
 Do not remove the battery until the power
turns OFF and the screen display
disappears.
2.
Slide the battery cover lock in the direction indicated
by the arrow (1), remove the battery cover (2), and
then remove the battery (3).
3.
Make sure to use the battery selector switch to select
the desired battery type.
Alkaline Ni-MH
LR6/Ni-MH,AA
LR6/Ni-MH,AA
Using alkaline batteries

Point

To ensure correct operation of the battery
power level indicator and the charging
function, make sure to select the desired
battery type with the battery selector switch.
LR6/Ni-MH,AA
LR6/Ni-MH,AA
Alkaline Ni-MH
Using rechargeable batteries