Denso BHT-904B, User Manual

Page: 124 / 198

110
BHT-904B/BHT-914B
[7] Communication test
Use the following procedure to perform a communication test.
1.
Select “7: COMMUNICATION” at the TEST menu and then pr
the
ENT
key.
right.
Refer to the following section for details of the above items.
Press the Backspace/clear key to return to the TEST menu.

Infrared Communication Test
1.
Arrange two BHTs, one as a master station and the other as a
their IrDA interface ports facing each other as illustrated below.
This test involves transmitting data from the test BHT and the master BHT returnin
BHT.
2.
Select “1: OPTICAL” at the TEST COMMUNICATION menu and
then press the
ENT
key.
The TEST COMMUNICATION screen displays as shown on the right.
ess
slave station (to be tested) with
g the data to the test
The TEST COMMUNICATION screen displays as shown on the
“1: OPTICAL”: Performs an infrared communication test.
ion test. “2: CONNECTOR”: Performs the USB connect
Master BHT
Slave BHT
(to be tested)
Data
Max. 15 cm