Denso BHT-904B, User Manual

Page: 101 / 198

87
Barcode Handy Terminal

on condition setting for the user program (OPEN “COM:”) crea
e system mode setting can be used. Therefore, it is not necessa
1.
elect “5: OPEN “COM:” DETAIL” at the SET COMMUNICATION
NT
key.
he OPEN “COM” DETAIL screen appears.
Th
: SETTINGS FROM”
Sets the communication condition setting for the user program (OPEN
mode setting.
:
Uses the setting specified in the user program (default).
“SYSTEM”:
Uses the system mode setting (setting specified in the us
Communication condition System mode setting screen
(“SET COMMUNICATION” menu)
Target API
“5: OPEN “COM:” DETAIL”: OPEN “COM:” communication c
For the communicati
ondition setting
ted via BHT-BASIC,
ry to specify the communication
r program does not need to be
menu and then press the
th
condition setting. Even if the transmission speed must be changed, the use
changed.
S
E
T
e highlighted setting is the current setting.
“1
“COM:”) created via BHT-BASIC to either the setting specified in the
user program or via the system
“API”
er program is not used).
terface in use *1
“3:COM PORT”
↓
“1:BASIC”
In
Transmission speed
“1:OPTICAL”
↓
“1:PARAMETER”
↓
“1:TRANSMIT SPEED”
OPEN "COM:"
Serial communication
protocol “2:PROTOCOL TYPE” Out .pnCmPrtcl (6060)
*1: Regardless of the interface specified in the user program, the operation is carried out using the
interface specified in the system mode. e.g., even if OPEN “COM:2” is specified; if COM1 is specified
in the system mode, the operation is carried out using COM1. Note, however, if COM3 or COM4 is
specified, the operation is carried out according to the setting specified in the user program.