Denso BHT-904B, User Manual

Page: 110 / 198

96
BHT-904B/BHT-914B
[8] Setting the user prog ram execution option
Use the following procedure to set the user program execution option.
1.
EXEC PROG OPTION” at the SET SYSTEM 2/2 menu
appears.
2.
“ON”: Enables the re
“2: RESTART
Sets the p screen when the auto-start execution program is re-launched.
For the function where the auto-start execution program is re-launched, refer to “4.3.6 Executing the
cution Program from the Point of Start-up”.
.
Select “1:
and then press the
ENT
key.
The EXEC PROG OPTION screen
The highlighted settings are the current settings.
Use the cursor keys ([ ▲ ] [ ▼ ]) or numeric keys ([1] [2]) to change
the setting and then press the
ENT
key.
Press the Backspace/clear key to return to the SET SYSTEM menu.
: RESUME”: “1
sume function.
Disables the resume function.
DIALOG”:
resence of the confirmation
“OFF”:
Auto-start Exe
“ON”:
The confirmation screen is displayed.
“OFF”: The confirmation screen is not displayed
The resume function is used to return the BHT to the status (screen) when the BHT power
was turned OFF previously.

Note
