Denso BHT-904B, User Manual

Page: 105 / 198

91
Barcode Handy Terminal
[7] Setting the TCP/IP, FTP and DHCP
Use the following procedure to change the TCP/IP, FTP and DHCP settings.
1.
then press the
ENT
key.
P/IP menu screen displays as shown on the right.
2.
s ([1] [2] [3]) to
highlight the item to be set, and then press the
ENT
key.
“1: SET TCP/IP”: Changes the TCP/IP setting.
HCP”: Changes the DHCP setting.
ils of the above items.
Press the Backspace/clear key to return to the SET SYSTEM menu.
: SET TCP/IP”: Setting the TCP/IP
1.
The SET TCP/IP menu screen displays as shown on the right.
rsor keys ([ ▲ ] [ ▼ ]) or numeric keys ([1] [2]) to highlight
e set, and then press the
ENT
key.
Press the Backspace/clear key to return to the SET TCP/IP menu.
yed.
munication device
“2: LINK LAYER”: Link layer
“3: TRANSMIT SPEED”: Communication speed with the CU
Press the Backspace/clear key to return to the SET TCP/IP menu.
Select “7: TCP/IP” at the SET SYSTEM menu and
The SET TC
Use the cursor keys ([ ▲ ] [ ▼ ]) or numeric key
“2: SET FTP”: Changes the FTP setting.
“3: SET D
Refer to the following section for deta

“1
Select “1: SET TCP/IP” at the SET TCP/IP menu and then pres
the
ENT
key.
s
2.
Use the cu
the item to b
“1: DEVICE”: Setting the TCP/IP device
Select “1: DEVICE” at the SET TCP/IP menu to display the screen on the
right where the current settings are displa
“1: TCP/IP DEVICE”:
TCP/IP com