Denso BHT-904B, User Manual

Page: 36 / 198

22
BHT-904B/BHT-914B
About “$$BRKLST.SYS”
If Scandisk finds an invalid file(s), it will automatically create the "$$BRKLST.SYS" file.
To check the contents of the file, upload the file in System Mode to the host computer. (Refer to “Chapter
4 System Operation” – “4.5.4 Uploading Files (UPLOAD MENU).”)
Contents of the “$$BRKLST.SYS” file
(1) File name
(2) Error factor + (Broken since the BHT has not been turned off normally)
* (Broken due to any other causes)
Records:
(3) Broken records 01000-01200 (Data in records numbered 1000 to 1200 is lost)
[Ex.]
SAMPLE1.DAT + 01000-01050
If more than one sequence of records is broken in a
same file, they will be written into the subsequent
records in the "$$BRKLST.SYS."
SAMPLE1.DAT + 01200-01250
SAMPLE1.DAT + 01600-01650
SAMPLE2.DAT * 00250-00275
SAMPLE3.DAT * 00100-00150
(1)
(2) (3)
2.6.5 If Broken Files Are Found
If broken files are found, carry out either of the following operations.

Delete those broken files.

Download valid files having the same names as broken ones.
(Refer to “Chapter 4 System Operation” – “4.5.10 Deleting Program/Data Files (DELETE FILE MENU).”)
(Refer to “Chapter 4 System Operation” – “4.5.3 Downloading Files (DOWNLOAD MENU).")