Denso BHT-904B, User Manual

Page: 153 / 198

139
Barcode Handy Terminal
4.5.15 Downloading/Uploading the System Message File
(SYSTEM MESSAGE Menu)
The system message file is a file (file name: “_B90MSG.FN3”) used by the system to display messages
) Upload the system message file to the host computer and so on.
d system message file at another BHT.

Up
reate a system message file based on the current system message settings and upload it to the host
essage file.
Receive the system message file from the host computer and so on to which it was backed up, and after
nd interface set at “[5] Setting the
ommunication environment” in section “4.5.6 System Environment Settings” are used when uploading
nd downloading.

Supplement

System messages are normally set when the BHT is shipped from the factory, and
therefore operation at this menu is unnecessary.
such as “Shutdown in progress. Do not remove the battery.” or “Charge the
battery!”.
Downloading/Uploading the System Message File
(1
(2) Download the uploade
loading the System Message File
C
computer and so on. After uploading, delete the created system m

Downloading the system message file
setting the stored system messages, delete the received system message file.
The communication parameters, communication protocol, a
c
a
Use the following procedure to download and upload the system message file.
1.
Press the [6] key while holding down the
SF
key at the SYSTEM
MENU.
The SYSTEM MESSAGE menu displays as shown on the right.
[1: DOWNLOAD]:
Downloads the system message file.
[2: UPLOAD]:
Uploads the system message file.
Refer to the following section for details of the above items
Press the Backspace/clear key to return to the SYSTEM MENU.