Denso BHT-904B, User Manual

Page: 4 / 198

iii
BHT-904B/BHT-914B
About this Manual

Due to improvements and so on, the content of this manual may be subject to change without prior notice.

The reproduction or duplication of the whole or part of this manual is strictly prohibited without prior consent.

Every attempt has been made to ensure that the content of this manual is thorough and up to date, however,
we kindly ask that any questionable content, mistakes, or omissions be reported to DENSO WAVE.

The copyright for this User’s Manual belongs to DENSO WAVE INCORPORATED.
Manual Composition
This manual is made up of the following 9 chapters.
Chapter 1 Outline
Describes the BHT system and provides an overall outline of the BHT.
Chapter 2 BHT Preparation
Describes information required by the user and procedures that must be performed prior to
commencing operation.
Chapter 3 Basic Operation
Describes basic operations performed by the operator and how to make basic changes to settings such
as the beeper volume
Chapter 4 System Operation
Describes how to initialize and update the system, start up a user program, and operate System Mode.
Chapter 5 Communication
Describes interfaces and communication specifications.
Chapter 6 Maintenance
Describes battery replacement and daily procedures for taking care of the BHT.
Chapter 7 Error Messages
Describes causes and countermeasures for error messages expected to occur during basic operation.
Chapter 8 Specifications
Describes specifications for hardware, readable barcodes, and interfaces.
Chapter 9-1 CU-900, CH-900 Specifications (Option)
Describes the main specifications for the CU-900, CH-900 Series (option).
Chapter 9-2 When File Transfer is Not Possible Using the Transfer Utility
Describes causes and countermeasures when unable to transfer files.