manualshive.com logo in svg

Delta ASDA-B3 Series, User Manual

The Delta ASDA-B3 Series User Manual is a comprehensive guide that enables users to maximize the potential of their ASDA-B3 Series products. Easily accessible for free download through our website, this manual provides essential instructions and troubleshooting tips to ensure smooth operation and optimal performance in any application.

Share
Download
background image

                                                                                                                                                                                                                     

 

  Wiring                                                                                                                               

3.1    System connection ··························································································· 3-3 

3.1.1    Connecting to peripheral devices (connecting to Delta communication type   

servo motor) ······························································································· 3-3 

3.1.2    Connectors and terminal blocks ······································································ 3-5 

3.1.3    Wiring for power supply ················································································· 3-6 

3.1.4    UVW connectors for the ASDA-B3 servo drive ···················································· 3-9 

3.1.5    Specification for the encoder connector ·························································· 3-17 

3.1.6    Wire selection ··························································································· 3-27 

3.1.7    IP67 connector wiring instructions·································································· 3-30 

3.2    Wiring diagram for the servo system ··································································· 3-32 

3.3    Wiring for CN1 I/O connector ············································································ 3-34 

3.3.1    CN1 I/O connector (for M, F, and E models) ····················································· 3-34 

3.3.2    Signal explanation for CN1 I/O connector (for M, F, and E models) ······················· 3-35 

3.3.3    Application: using the CN1 quick connector for wiring (for M, F, and E models) ········ 3-38 

3.3.4    CN1 I/O connector (for L model) ···································································· 3-38 

3.3.5    Signal explanation for CN1 I/O connector (for L model) ······································ 3-40 

3.3.6    Application: using the CN1 quick connector for wiring (for L model) ······················· 3-45 

3.3.7    CN1 wiring diagrams ·················································································· 3-48 

3.4    Wiring for the CN2 encoder connector ································································ 3-56 

3.5    Wiring for the CN3 communication connector ······················································· 3-59 

3.5.1    Wiring for the MODBUS communication connector ············································ 3-59 

3.5.2    Wiring for the CANopen communication connector ············································ 3-61 

3.6    CN4 serial connector (Mini USB) ······································································· 3-63 

3.7    Wiring for the CN6 communication connector ······················································· 3-64 

3.7.1    Wiring for the DMCNET communication connector ············································ 3-64 

3.7.2    Wiring for the EtherCAT communication connector ············································ 3-66 

3.8    CN10 STO connector (Safe torque off) ································································ 3-68 

3.9    STO function (Safe Torque Off) ········································································· 3-69 

3.9.1    Introduction to STO ···················································································· 3-69 

3.9.2    The potential danger of STO········································································· 3-69 

3.9.3    Specifications of STO ················································································· 3-70 

3.9.4    How does the STO function work? ································································· 3-71 

3.9.4.1    Activation status ···················································································· 3-71 

3.9.4.2    Deactivation status ················································································· 3-73 

3.9.5    Wiring for STO ·························································································· 3-74 

3.9.5.1    Wiring without the STO function ································································ 3-74 

3.9.5.2    Wiring for single drive module with the STO function ····································· 3-74 

3 

Summary of Contents for ASDA-B3 Series
















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ASDA-B3 Series

Nidec AD07-E-1-1-023-1-0002 Installation & Operating Instructions Manual preview
AD07-E-1-1-023-1-0002
Brand: Nidec Pages: 56
Xinje DS5C Series Manual preview
DS5C Series
Brand: Xinje Pages: 121
SEW-Eurodrive MOVIMOT MM..D Series Operating Instructions Manual preview
MOVIMOT MM..D Series
Brand: SEW-Eurodrive Pages: 52
Eaton Cutler-Hammer SLX9000 Series User Manual preview
Cutler-Hammer SLX9000 Series
Brand: Eaton Pages: 172
IMS MFORCE MICRO DRIVE Plus MICROSTEPPING Operating Instructions Manual preview
MFORCE MICRO DRIVE Plus MICROSTEPPING
Brand: IMS Pages: 64
SEW-Eurodrive MOVIPRO SDC Manual preview
MOVIPRO SDC
Brand: SEW-Eurodrive Pages: 156
Eskridge 1400 Service Manual preview
1400
Brand: Eskridge Pages: 7
Leadshine DM556E User Manual preview
DM556E
Brand: Leadshine Pages: 15
Leadshine Technology M415B User Manual preview
M415B
Brand: Leadshine Technology Pages: 8
Mitsubishi FREQROL-SF Troubleshooting Manual preview
FREQROL-SF
Brand: Mitsubishi Pages: 219
Chauvet Professional onAir Flex Drive 2 Quick Reference Manual preview
onAir Flex Drive 2
Brand: Chauvet Professional Pages: 8
YASKAWA SGM7D-01G Product Manual preview
SGM7D-01G
Brand: YASKAWA Pages: 502
Applied Motion Products MDX Series Quick Setup Manual preview
MDX Series
Brand: Applied Motion Products Pages: 2
PR electronics Hart 5107B Manual preview
Hart 5107B
Brand: PR electronics Pages: 62
ABB ACS880-07CLC User Manual preview
ACS880-07CLC
Brand: ABB Pages: 40
LS 28 DTP RV07 Mounting Instructions preview
28 DTP RV07
Brand: LS Pages: 16
YASKAWA SGD7W Series Selection Manual preview
SGD7W Series
Brand: YASKAWA Pages: 337
Danfoss VLT CANopen MCA 105 Programming Manual preview
VLT CANopen MCA 105
Brand: Danfoss Pages: 50

Brands by name

Popular brands

Load more brands