Delta ASDA-B3 Series User Manual Download Page 213

Page: 213 / 815

Operation Mode

ASDA-B3

6-30

6.5 Dual mode

Apart from the single mode for position, speed, and torque, there are also eight dual / multiple

modes available for operation (see Section 6.1).

Mode

Short name Code

Description

Dual mode

PT-S

PT and S can be switched with DI signal, S_P.

PT-T

PT and T can be switched with DI signal, T_P.

PR-S

PR and S can be switched with DI signal, S_P.

PR-T

PR and T can be switched with DI signal, T_P.

S-T

S and T can be switched with DI signal, S_T.

PT-PR

PT and PR can be switched with DI signal, PT_PR.

Multi-mode

PT-PR-S

PT, PR, and S can be switched with DI signals, S_P and PT_PR.

PT-PR-T

PT, PR, and T can be switched with DI signals, T_P and PT_PR.

The dual mode for Sz and Tz is not supported. To avoid occupying too many digital inputs in the

dual mode, Speed and Torque modes can use the external analog voltage as the command

source to reduce the use of DI points (SPD0, SPD1 or TCM0, TCM1). In addition, Position

mode can use the PT mode pulse input to reduce the use of DI points (POS0 - POS6). Refer to

Section 3.3.2 for the table of DI/O default value in each mode.

Summary of Contents for ASDA-B3 Series
















































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ASDA-B3 Series

Reviews:

Related manuals for ASDA-B3 Series

Brands by name

Popular brands

Delta ASDA-B3 Series, User Manual

Search results

Summary of Contents for ASDA-B3 Series

Reviews:

Related manuals for ASDA-B3 Series

Brands by name

Popular brands