Delta Tau PMAC Pack, Hardware Reference Manual

Page: 13 / 121

PMAC-Pack
2 Overview
Conventions Used in This Manual
The following conventions are used throughout the manual:
< ENTER >
< CTRL+4 >
Italic text inside arrows denotes keyboard keys or
key combinations.
WARNING:
Information, which if not observed, may cause serious
injury or death.
Caution:
Information, which if not observed, may cause damage
to equipment or software.
Note:
A note concerning special functions or information of
special interest.
Electrostatic Sensitive Device. Use ESD control
measures when handling, packing, and shipping
(reference Appendix A).
Indicates procedures or information that must be
complied with to comply with European Community
Interference Causing Equipment regulations.
Related Technical Documentation
The following technical manuals are required to successfully install and operate the Delta Tau PMAC-
Pack. These manuals should be included in the technical documentation package you received with the
PMAC-Pack, or with your software package(s). If any of these manuals are missing, please contact Delta
Tau for a replacement before attempting installation.
Manual Number Manual Title
3A0-602204-xUxx PMAC User's Manual
3A0-602204-xSxx PMAC/PMAC2 Software Reference
3A0-602274-xHxx
PMAC-Lite Hardware Reference Manual
3A0-0PEWIN-xUxx PMAC Executive for Windows User’s Manual (PEWIN)
Safety Summary
The following are general safety precautions not related to any specific procedures and therefore may not
appear elsewhere in this publication. These are recommended precautions that personnel must understand,
apply, and adhere to during the phases of installation, operation, and maintenance.
Keep Away From Live Circuits
Do not replace components or make adjustments inside the equipment with power applied. Under certain
conditions, dangerous potentials may exist when power has been turned off due to charges retained by
capacitors. To avoid casualties, always remove power and discharge and ground a circuit before touching
it.
Live Circuit Contact Procedures
Never attempt to remove a person from a live circuit with your bare hands. To do so is to risk sure and
sudden death. If a person is connected to a live circuit, the following steps should be taken:
1. Call for help immediately
2. De-energize the circuit, if possible.
3. Use a wooden hot stick to pull the person free of the circuit.
4. Apply cardiopulmonary resuscitation (CPR) if the person has stopped breathing or is in cardiac arrest.
5. Obtain immediate medical assistance.