11. Saving and Loading Data and Settings
Operation and Installation Manual for SOLIVIA 2.0/2.5/3.0/3.3/3.6/5.0 EU G4 TR
68
11.7 Creating Reports
The reports contain the following information:
●
Firmware/serial number of the model
●
Statistics, events, comparisons with a summary of statistics
and events
●
Internal logs
●
AT reports
●
LVD reports (only for
DE LVD
and
DK LVD
grids)
➔
USB features
Options
Install settings
-------------------
Production info
SOLIVIA ##
1. In the main menu, press the
buttons to select
USB
features
and then press the button.
→ A note on IP65 protection is then displayed.
protection.
will lose the IP65
Without cover, you
2. Press the button to confirm.
→ The
300 USB features
menu is then displayed.
➔
Save settings
Save swap data
Firmware update
Create reports
Load settings
300 USB features
3. Press the
buttons to select
Create Reports
and
then press the button.
→ The data is saved in a "SWAP_###.CFG" file on the
USB drive. The ### characters represent the RS485
ID of the solar inverter from which the data is to be
loaded, for example "001".
nOTE
: If the message
Pendrive
error
is displayed, make sure the
USB drive is properly inserted.
Press ENTER
Successful
Create reports
4. Press the button to confirm.
11.8 Service
This function is used for servicing purposes. You will be contacted
by the Delta Support Team when this function must be used.
