67
Operation and Installation Manual for SOLIVIA 2.0/2.5/3.0/3.3/3.6/5.0 EU G4 TR
11. Saving and Loading Data and Settings
EN
11.6 Saving Swap Data
nOTE
In this chapter, the term "swap" means the
replacement of a solar inverter with a new device
of the same type, without changing the installa-
tion parameters, e.g., those of the PV modules.
The replacement may only be performed after
consulting Delta Solar Support. The support team
will discuss the correct procedure with you.
The following information is saved:
●
Grid settings
●
User settings
●
Display settings
●
Production settings
●
RS485 ID
●
Statistics
●
Date of first installation
➔
USB features
Options
Install settings
-------------------
Production info
SOLIVIA ##
1. In the main menu, press the
buttons to select
USB
features
and then press the button.
→ A note on IP65 protection is then displayed.
protection.
will lose the IP65
Without cover, you
2. Press the button to confirm.
→ The
300 USB features
menu is then displayed.
➔
Save settings
Save swap data
Firmware update
-------------------
300 USB features
3. Press the
buttons to select
Save Swap Data
and
then press the button.
→ The data is saved in a "SWAP_###.CFG" file on the
USB drive. The ### characters represent the RS485
ID of the solar inverter from which the data is to be
loaded, for example "001".
nOTE
: If the message
Pendrive
error
is displayed, make sure the
USB drive is properly inserted.
Press ENTER
Successful
Save data
4. Press the button to confirm.
