manualshive.com logo in svg

Dell PowerEdge T310, Hardware Owner'S Manual

Share
Download
Dell PowerEdge T310 Hardware Owner'S Manual Download Page 96

96

Installing System Components

Figure 3-10.

Removing or Installing a Cabled Hard Drive

5

Detach the hard-drive bracket from the hard drive by pushing out at the 
edges of the bracket and removing the hard drive.

 

NOTE: 

If you are not replacing the hard drive, remove the drive from the drive 

bracket (see Figure 3-11) and insert the empty bracket back into the drive bay.

6

Replace the system cover. See "Closing the System" on page 86.

7

Place the system upright on a flat surface. 

8

Reattach any peripherals and connect the system to an electrical outlet.

9

Turn on the system and attached peripherals.

1

power/data cable

2

tabs (2)

3

hard drive 

4

hard-drive bracket

1

2

4

3

book.book  Page 96  Wednesday, August 19, 2009  4:40 PM

Summary of Contents for PowerEdge T310



































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands