manualshive.com logo in svg

Dell PowerEdge T310, Hardware Owner'S Manual

Share
Download
Dell PowerEdge T310 Hardware Owner'S Manual Download Page 86

86

Installing System Components

Figure 3-5.

Opening and Closing the System 

 

Closing the System

1

Ensure that all internal cables are connected and folded out of the way.

2

Ensure that no tools or extra parts are left inside the system.

3

Place the bottom edge of the cover, opposite from the cover release latch, 
into the slots in the system chassis. See Figure 3-5.

4

Lower the cover into the chassis. 

5

Press the latch end of the cover into the chassis until the latch 
locks into place.

6

Turn the lock on the cover release latch clockwise to the locked position. 
See Figure 3-5. 

1

cover release latch lock

2

cover release latch

3

system cover

4

chassis slots

1

2

4

3

book.book  Page 86  Wednesday, August 19, 2009  4:40 PM

Summary of Contents for PowerEdge T310



































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands