Dell PowerEdge R200, Hardware Owner'S Manual

Page: 84 / 182

84
Installing System Components
Figure 3-17. Installing and Removing a Memory Module
Removing Memory Modules
CAUTION:
Only trained service technicians are authorized to remove the system
cover and access any of the components inside the system. Before performing any
procedure, see your
Product Information Guide for complete information about
safety precautions, working inside the computer and protecting against
electrostatic discharge.
1
Open the system. See "Opening the System" on page 54.
2
Locate the memory module sockets. See Figure 6-2.
3
Press down and out on the ejectors on each end of the socket until the
memory module pops out of the socket. See Figure 3-17.
4
Close the system. See "Closing the System" on page 55.
1 memory module 2 memory module
socket ejectors (2) 3 socket
4 alignment keys (2)
4
2
3
1
book.book Page 84 Thursday, August 30, 2007 3:30 PM