Dell PowerEdge R200, Hardware Owner'S Manual

Page: 42 / 182

42
Using the System Setup Program
Console Redirection Screen
Table 2-7 lists the options and descriptions for the information fields that
appear on the
Console Redirection screen.
Serial Port 1
(
COM1 default)
Serial Port options are COM1 , COM3 , BMC Serial ,
BMC NIC , COM1/BMC , and Off . If an optional remote
access controller (RAC) is installed in the system, RAC is
an additional option.
Serial Port shares three usage models. For standard usage,
Serial Port attempts to use COM1 first, and then COM3.
For BMC usage, serial port 1 uses the COM1 address and
communication can be either via the serial port or the
integrated shared NIC. RAC control uses only the COM1
address.
The COM1/BMC setting allows you to toggle the system
between a COM1 setting and BMC Serial setting. In this
mode, press <ESC> to enter the BMC Serial setting and
press <ESC><q> to return to the
COM1 setting.
Off and COM3 are not available options when Console
Redirection is set to use Serial Port 1.
Speaker
(
On default)
Enables or disables the system internal speaker.
Table 2-7. Console Redirection Screen Options
Option Description
Console Redirection
(
Off default)
Sets the console redirection feature to Off or Serial Port 1 .
Failsafe Baud Rate
(
115200 default)
Displays if the failsafe baud rate is used for console
redirection.
Remote Terminal Type
(
VT 100/VT 220 default)
Select either VT 100/VT 220 or ANSI .
Redirection After Boot
(
Enabled default)
Enables or disables console redirection after your system
restarts.
Table 2-6. Integrated Devices Screen Options (continued)
Option Description
book.book Page 42 Thursday, August 30, 2007 3:30 PM