Dell PowerConnect J-EX4500, Hardware Manual

Page: 92 / 226

Related
Documentation
Rack Requirements for J-EX4500 Switches on page 57
•
•
Cabinet Requirements for J-EX4500 Switches on page 58
•
Clearance Requirements for Airflow and Hardware Maintenance for J-EX4500 Switches
on page 60
Unpacking a J-EX4500 Switch
The J-EX4500 switches are shipped in a cardboard carton, secured with foam packing
material. The carton has an accessory compartment and contains the quick start
instructions.
CAUTION: J-EX4500 switches are maximally protected inside the shipping
carton. Do not unpack the switches until you are ready to begin installation.
To unpack the switch:
1.
Open the carton.
2.
Pull out the packing material holding the switch in place.
3.
Verify the parts received against the inventory on the label attached to the carton and
listed in Table 28 on page 76.
4.
Save the shipping carton and packing materials in case you need to move or ship the
switch later.
Table 28: Inventory of Components Provided with a J-EX4500 Switch
Quantity Component
1 Switch
1 Virtual Chassis module (preinstalled)
1 Fan tray (preinstalled)
1 AC Power supply (preinstalled )
1 Power supply jumper cable
1 Power cord retainer clip
• Power supply cover
panel: 1
• Uplink module cover
panels: 2
Cover panels for slots without installed components
40 Dust covers for ports
76
Dell PowerConnect J-Series J-EX4500 Ethernet Switch Hardware Guide