Dell PowerConnect J-EX4500, Hardware Manual

Page: 143 / 226

CHAPTER 14
Removing Switch Components
• Installing and Removing J-EX4500 Switch Hardware Components on page 127
• Removing a Power Supply from a J-EX4500 Switch on page 128
•
Removing a Fan Tray from a J-EX4500 Switch on page 130
•
Removing an Uplink Module from a J-EX4500 Switch on page 131
• Removing a Virtual Chassis Module from a J-EX4500 Switch on page 133
• Disconnecting a Virtual Chassis Cable from a J-EX4500 Switch on page 135
•
Disconnecting a Fiber-Optic Cable from a J-EX Series Switch on page 136
•
Removing a Transceiver from a J-EX Series Switch on page 137
• Removing a Cage Nut from a Rack on page 138
Installing and Removing J-EX4500 Switch Hardware Components
The J-EX4500 switch chassis is a rigid sheet-metal structure that houses the hardware
components. The field-replaceable units (FRUs) in J-EX4500 switches are:
• Power supply
• Fan tray
•
Uplink module
•
Virtual Chassis module
• SFP transceiver
• SFP+ transceiver
The power supply, fan tray, uplink module, and transceivers are hot-removable and
hot-insertable: You can remove and replace them without powering off the switch or
disrupting switch functions.
The Virtual Chassis module is offline field-replaceable: You can remove and replace the
module, but the switch must be powered off first.
See these topics for instructions for installing and removing components:
•
Installing a Power Supply in a J-EX4500 Switch on page 88
•
Removing a Power Supply from a J-EX4500 Switch on page 128
127