Dell PowerConnect 5316M, Reference Manual

Page: 49 / 378

Command Modes
29
back-pressure Enables Back Pressure on a given interface.
channel-group Associates a port with a Port-channel.
description Adds a description to an interface.
dot1x max-req Sets the maximum number of times that the Ethernet Switch Module
sends an EAP - request/identity frame to the client, before restarting the
authentication process.
dot1x multiple-hosts Allows multiple hosts (clients) on an 802.1X-authorized port, that has
the
dot1x port-control
Interface Configuration mode command set to
auto .
dot1x port-control Enables manual control of the authorization state of the port.
dot1x re-authentication Enables periodic re-authentication of the client.
dot1x single-host-violation Configures the action to be taken, when a station whose MAC address is
not the supplicant MAC address, attempts to access the interface.
dot1x timeout quiet-period Sets the number of seconds that the Ethernet Switch Module remains in
the quiet state following a failed authentication exchange.
dot1x timeout re-authperiod Sets the number of seconds between re-authentication attempts.
dot1x timeout server-timeout Sets the time for the retransmission of packets to the authentication
server.
dot1x timeout supp-timeout Sets the time for the retransmission of an EAP-request frame to the
client.
dot1x timeout tx-period Sets the number of seconds that the Ethernet Switch Module waits for
a response to an Extensible Authentication Protocol (EAP) -
request/identity frame, from the client, before resending the request.
duplex Configures the full/half duplex operation of a given ethernet interface
when not using auto-negotiation.
flowcontrol Configures the Flow Control on a given interface.
garp timer Adjusts the GARP application join, leave, and leaveall GARP timer
values.
gvrp enable (interface) Enables GVRP on an interface.
gvrp registration-forbid De-registers all VLANs, and prevents dynamic VLAN registration on the
port.
gvrp vlan-creation-forbid Enables or disables dynamic VLAN creation.
ip address Sets an IP address.
ip address dhcp Acquires an IP address on an interface from the DHCP server.
lacp port-priority Configures the priority value for physical ports.
lacp timeout Assigns an administrative LACP timeout.