Dell PowerConnect 5316M, Reference Manual

Page: 242 / 378

222
SNMP Commands
• oid-tree — Object identifier of the ASN.1 subtree to be included or excluded from the
view. To identify the subtree, specify a text string consisting of numbers, such as 1.3.6.2.4 ,
or a word, such as system . Replace a single subidentifier with the asterisk (*) wildcard to
specify a subtree family; for example 1.3.*.4.
• included — The filter type is included.
• excluded — The filter type is excluded.
Default Configuration
Product specific.
Command Modes
Global Configuration
User Guidelines
• You can enter this command multiple times for the same filter record. Later lines take
precedence when an object identifier is included in two or more lines. .
Example
The following example creates a filter that includes all objects in the MIB-II system group except
for sysServices (System 7) and all objects for interface 1 in the MIB-II interfaces group :
snmp-server contact
The snmp-server contact Global Configuration mode command sets up a system contact. To
remove the system contact information, use the no form of the command.
Syntax
snmp-server contact text
no snmp-server contact
• text — Character string, up to 160 characters, describing the system contact information.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
Console (config)# snmp-server view user-view system included
Console (config)# snmp-server view user-view system.7 excluded
Console (config)# snmp-server view user-view ifEntry.*.1
included