Dell PowerConnect 5316M, Reference Manual

Page: 200 / 378

180
Port Channel Commands
• port-channel-range — List of port-channels to configure. Separate port-channels with a
comma and no spaces. A hyphen designates a range of port-channels.
• all
— All port-channel.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
• Commands under the interface range context are executed independently on each interface
in the range. If the command returns an error on one of the interfaces, it will not stop the
execution of the command on other interfaces.
Example
The following example shows how port-channels 1, 2 and 6 are grouped to receive the same
command.
channel-group
The
channel-group
Interface Configuration mode command associates a port with a port-channel.
To remove a port from a port channel, use the no form of this command.
Syntax
channel-group port-channel-number mode { on | auto }
no channel-group
• port-channel_number — Specifies the number of the valid port-channel for the current
port to join.
• on — Forces the port to join a channel.
• auto — Allows the port to join a channel as a result of an LACP operation.
Default Configuration
The port is not assigned to any port-channel.
Command Mode
Interface Configuration (Ethernet) mode
console(config)# interface range port-channel 1-2,6
console(config-if)#