Dell PowerConnect 5316M, Reference Manual

Page: 82 / 378

62
Address Table Commands
Syntax
bridge multicast forbidden forward-all
{
add
|
remove
} {
ethernet interface-list
|
port-
channel port-channel-number-list }
no bridge multicast forward-all
• add — Forbids forwarding all multicast packets.
• remove — Does not forbid forwarding all multicast packets.
• interface-list — Separates non-consecutive valid Ethernet ports with a comma and no
spaces; a hyphen is used to designate a range of ports.
•
port-channel-number-list
— Separates non-consecutive valid port-channels with a comma
and no spaces; a hyphen is used to designate a range of port-channels.
Default Configuration
By default, this setting is disabled (forwarding to the port is not forbidden).
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
• IGMP snooping dynamically discovers multicast router ports. When a multicast router port is
discovered, all the multicast packets are forwarded to it unconditionally.
• This command prevents a port to be a multicast router port.
Example
In this example, forwarding all multicast packets to g16 are forbidden.
bridge aging-time
The bridge aging-time Global Configuration mode command sets the address table aging time. To
restore the default, use the no form of the bridge aging-time command.
Syntax
bridge aging-time seconds
no bridge aging-time
•
seconds
— Time in seconds. (Range: 10 - 360 seconds)
console(config)# interface vlan 2
console(config-if)# bridge multicast forbidden forward-all add
ethernet g16