SSH Commands
265
SSH Commands
ip ssh server
The
ip ssh server
Global Configuration mode command enables the Ethernet Switch Module to be
configured from a SSH server. To disable this function, use the
no
form of this command.
Syntax
ip ssh server
no ip ssh server
Default Configuration
SSH is enabled.
Command Mode
Global Configuration mode
User Guidelines
• If encryption keys are not generated, the SSH server is in standby until the keys are generated.
To generate SSH server keys, use the commands
crypto key generate rsa
, and
crypto key
generate dsa
.
Example
The following example enables the Ethernet Switch Module to be configured from a SSH server.
ip ssh port
The
ip ssh port
Global Configuration mode command specifies the port to be used by the SSH
server. To use the default port, use the
no
form of this command.
Syntax
ip ssh port
port-number
no ip ssh port
•
port-number
— Port number for use by the SSH server (Range: 1 - 65535).
Default Configuration
The default value is 22.
console(config)#
ip ssh server
23
Summary of Contents for PowerConnect 5316M
