Command Groups
5
Configuration and Image Files Commands
sntp trusted-key
Authenticates the identity of a system to which
Simple Network Time Protocol (SNTP) will
synchronize.
Global
Configuration
sntp client poll timer
Sets the polling time for the Simple Network Time
Protocol (SNTP) client.
Global
Configuration
sntp broadcast client
enable
Enables the Simple Network Time Protocol (SNTP)
broadcast clients.
Global
Configuration
sntp anycast client enable
Enables anycast clients
Global
Configuration
sntp client enable
(interface)
Enables the Simple Network Time Protocol (SNTP)
client on an interface.
Interface
Configuration
sntp unicast client enable
Enables the Ethernet Switch Module to use the
Simple Network Time Protocol (SNTP) to request
and accept Network Time Protocol (NTP) traffic
from servers.
Global
Configuration
sntp unicast client poll
Enables polling for the Simple Network Time
Protocol (SNTP) predefined unicast clients.
Global
Configuration
sntp server
Configures the Ethernet Switch Module to use the
Simple Network Time Protocol (SNTP) to request
and accept Network Time Protocol (NTP) traffic
from a server.
Global
Configuration
show clock
Displays the time and date from the system clock.
User EXEC
show sntp configuration
Shows the configuration of the Simple Network
Time Protocol (SNTP).
Privileged EXEC
show sntp status
Shows the status of the Simple Network Time
Protocol (SNTP).
Privileged EXEC
Command Group
Description
Access Mode
delete startup-config
Deletes the startup-config file.
Privileged EXEC
copy
Copies files from a source to a destination.
Privileged EXEC
boot system
Specifies the system image that the Ethernet Switch
Module loads at startup.
Privileged EXEC
show running-config
Displays the contents of the currently running
configuration file.
Privileged EXEC
show startup-config
Displays the startup configuration file contents.
Privileged EXEC
show backup-config
Displays the backup configuration file contents.
Privileged EXEC
Summary of Contents for PowerConnect 5316M
